Open End Cotton Yarn Exporter, Manufacturer from SIDHIVINAYAK COTSPIN LTD

Open end Cotton Yarn and its integrity in textile industries
 

On defining yarn in literal terms, it has to be mentioned that it is something which refers to a bundle of fibers which are interlocked and are primarily used to produce textiles, the procedures of which would include knitting, weaving, sewing, ropemaking and other similar ones. In this context it has to be mentioned that Open end Cotton Yarn is a type of yarn which has been created without the usage of the spindle whatsoever. Open end spinning absolutely shirks the employment of spindle in its procedure of producing yarn. This kind of a procedure is quite ancient in practice and that this has shown relatively positive results in their products as well, on account of which this kind of a procedure has been in high prevalence since its inception till date.

Characteristic features of open-end spinning:
This procedure of spinning yarn without a spindle is also termed as rotor spinning or break spinning. This is essentially a highly effective and advantageous procedure which calls for less concentration of labor and also is quite fast in its activities, when compared to the ring procedure of spinning yarn whatsoever. Open end spinning is carried out with a twist that is introduced to the yarn and that the production of yarn depends on such twists going higher whatsoever. A noteworthy fact over here in this procedure is usage of package rotation is absolutely not employed in any case. Power cost is considerably low and that through this procedure; relatively larger spools can be derived without much of a hassle. Dye ability is better in this case and that these kinds of yarns are essentially heavier than the other ones. One of the most significant feature that has to be kept in mind while making use of open-end spinning procedure is that, this is not supposed to be favorable for manmade fiber spinning whatsoever.

Advantages of open end cotton yarn:
Open end Cotton Yarn is well known for its features and performances which are just effective and satisfactory in the true sense of the terms. Products out of these kinds of spinning procedures are capable of displaying quality at their best and that no other procedure is supposed to excel with its products to this extent. The strength that is attached on to the products made of this yarn is up to the mark which shows no breakage for ages whatsoever and that the finish of these products are carried out in an excellently skilful manner which give in for increasing demands for Open end Cotton Yarn with the passage of time. This kind of yarn has a splendid feel of fabric which makes it a perfect fit for getting applied in the processes of knitting and weaving at large.

Fast facts about Open end Cotton Yarn:

• These are majorly manufactured out of cotton which is of superior and refined quality.
• The polyester content in these yarns make them all the more durable and sustainable.
• Latest technologies are employed in the processes of manufacturing open end yarns. 

 

Get more details visit here : SIDHIVINAYAK COTSPIN LTD 

Follow Us G+

Read More

Some information about MS Flat Bars

Steel is widely regarded as one of the most important as well as one of the toughest materials in the world. As a result, with the passage of time the use of steel has become more and more varied, encompassing every sphere of industry, be it construction or be it manufacturing. Over the last few years the improvement in technology has made it possible to manufacture quality steel products at affordable rates. Hence, buying steel products is not at all hard these days. There are a large number of products that are made of Steel Flat Bars. These sheets are designed to match the requirement a large number of industrial uses and so industrial users all over the world regularly purchase these products.

Manufacturing
These bars are manufactured of the best quality mild steel materials so that they are able to withstand different kinds of industrial as well as climatic conditions. It is quite obvious that as these bars form the main infrastructure of building, industrial machines, frames and other industrial products, they have to be of impeccable quality. Steel Flat Bars of different sizes are manufactured are producers, though he most common dimensions are 2 meter to 6 meter length, 10 mm to 80 mm width and 3mm to 25mm thickness. However, it is also possible for users to get custom made products from the manufacturers if need be.

Advantages
One of the main advantages of these Mild Steel Flat Bars is that they are hugely user friendly. They are devoid of any intricate design and can be installed and uninstalled quite easily. Over the last few years there has been a huge advancement in the manufacturing process that has made these flat bars more user friendly.
Being made of top quality materials, these bars are able to deliver impeccable performance under all circumstances, thus providing an excellent return on the investment. As a result they are a lot cost effective as well.
These steel bars are highly efficient as well. They are tried and tested for a number of times before being released into the market. As a result, users can be rest assured that they are going to have the best possible service from these products.

Uses
Steel Flat Bars are widely bused nowadays in a large number of industrial sectors. The chief products manufactured from these bars are clamps, flanges, washers, base plates, scaffoldings, escalators, elevators, vehicle body, rails, tippers, truck trailers, auto-ancillaries, cable trays and ships. The variation in the use of these products underscores the fact that users should be careful enough while making a choice of such a product.

Nowadays it is possible to buy Mild Steel Flat Bars anywhere in the world as most of the manufacturers offer these products on sale at affordable prices. It is also possible for users to go for online shopping. Most of the manufacturers nowadays sell their products through their website. Buyers can easily visit these websites and place an online order for the desired product.

Follow Us : G+

Read More

Utility of Mild Steel Angles in modern industrialisation

The facet of industrialisation is creating vast expansion in its field. The metals that are in prevalence in various constructional purposes nowadays are refined and modified in every way possible so as to enhance the efficacy of the products which are to be made out of these metals. Steel is one of the many important metals that are in use in the present times and it is immensely useful in purposes more than one. Steel has been in prevalence for a long time though, mild steel is a recent modification of the metal that inherits the goodness of the metal in total, yet serves purposes in a wider and better way.

The MS Angles are a product which is made out of mild steel and are highly acknowledged for their smoothness, continuity and durability that they behold. Appropriate mechanical properties and close tolerances are the features ensured to these angles who assure the user of the exact dimensions and high tensile stamina. These angles are easy to be installed and are available in varied sizes from which users can make their own choice according to the purpose needed to be served by these angles.

The MS Angles are so designed that they serve the purposes of manufacturing the towers of transmission and the telecommunication. Besides, these angles are also fit for the use in the architectural applications in any building or constructional base. The designing of these angles are however subject to the choice of the clients who happen to order for these angles. The companies that manufacture such angles abide by the preferences of the clients and accordingly make up the products.

Mild Steel Angle Bars are another type of metallic instruments that are in use at a large scale nowadays. These are of different sizes and shapes and users are accessible to give their own choice regarding the size and the shape they want out of these bars as per their own requirement. The usage of the Mild Steel Angle Bars is quite wide and varied. The strength, durability and formability give in for a number of purposes to be served, the most prominent of them being the structural and constructional applications.

The Mild Steel angle bars are used in the manufacturing procedure of all kinds of regular and specialist products including the hi-tech and the low-tech ones also. Besides, trailers and fences also require such steel bars in their construction. The reduced carbon content in the making of the Mild Steel Angle Bars gives in for enhanced efficacy and working ease to these bars whatsoever.

Features:

• MS Angle can be recycled, thus being an eco-friendly material of use.
• Mild steel is a low cost material beholding applications and serving purposes more than one.
• Steel is required in almost all types of constructions hence mils steel angles and bars are of high efficiency.
• Instruments made of mild steel are highly used in the manufacture of domestic appliances and also in industries of agriculture and heavy machinery.

Follow Us : G+

Read More

Diamond Bangles – the most preferred ones among the bangles

What is a bangle?
Bangles are traditional ornaments which are worn by the women mostly in the South Asian countries and are considered as auspicious in the arms of the married women, though there are also traditions of men wearing bangles which are called Kada or Kara in their wrist in many cultures as well. Diamond Bangles are just a part of the traditional bangles that are now used widely in almost all parts of the world.
 

History:
The history of bangles can be traced back to the time of ancient history where excavations at many archeological sites have shown relics of bangles which were mainly made up of sea shell, bronze, gold, copper, chalcedony and agate. These primitive bangles were soon followed by the decorative bangles at the later part of the history. Bangles were a part of the traditional jewellery in India but it is now used all over the world.
 

Designs:
The bangles are usually round in shapes and unlike the bracelets they are not flexible and can also be both precious and non precious. The precious ones are made of gold, platinum, silver and diamond.
 

Types:
Bangles are particularly of two types that are a split, cylindrical spring opening or closing type and a solid cylinder type. Diamond Bangles fall in the category of the bangles and in the present scenario they are the most preferred choice of almost every woman. Since this type of bangles symbolizes eternal love so it makes a perfect gift for anniversary, wedding proposal or birthdays.
 

Beauty associated with this bangle:
Diamonds are said to be women’s best friend and what could be better for a woman than Diamond Bangles as they look both classy and attract the attention of the onlookers. The brides of all ages crave for these bangles during their wedding.
 

Where one can find them?
Previously they were only found at big stores or showrooms but now with their popularity, comparative drop in the market price and advancement in the technology on can get them at home through online shopping and not only that, there are a huge variety of designs and variation from high to low price. But, before going for some particular site to buy, one must keep in the mind that the site has enough reputation and comes with a lifetime guarantee.
 

Types of Diamond Bangles:
These types of bangles come in many shapes, sizes and could be crafted out of many metals speaking of which gold remains the most popular among the choice followed by white gold and platinum which makes it an accessory eternally cherishable.
 

Characteristics:
Elegance: For an instant elegance one can easily add that dash of beauty with the attire for that look to die for.
 

Sophistication: This type of bangles is usually associated with sophistication since it has such textured finish that shines in the light.
Diamond Bangles add that instant touch of boldness to the women’s attire and help increase the self esteem of the person instantly. 

Get complete information about our product range visit : GEMCO INTERNATIONAL

Read More

Process of making Diamond Earrings

Diamond Earrings are pieces of jewelry that are bought and used by women all over the world and in a majority of countries. An earring is worn after piercing the earlobe or any other external part of the ear. Normal earrings are worn by both men and women but earrings made of diamond are mainly worn by women.

Diamonds and similar gemstones have been used as objects of adornment in many ancient civilizations and especially in India where diamond was first mined. Diamond Earrings is so valued because the light disperses into the various colors of the spectrum inside the diamond and can be seen clearly, giving a celestial look to the piece. That is the reason behind the shining of the diamond. Four features of a diamond are clarity, cut, carat and color.

Clarity is the term that is used in the diamond and jewelry industry to denote the presence of impurities or inclusions in the diamond. These inclusions may be particles of crystals or any other of materials like the inclusion of a second diamond crystal or imperfections in the structure of the diamond in the shape of cracks. All these make the diamond appear whitish. Some diamonds become more valuable than others only when they have been verified to have higher grading of clarity. According to data, 20 percent of all diamonds mined annually have clarity enough to be taken in as perfect diamonds. The rest of the diamonds are sent to the various industries to be used as lasers, drills, etc.

You may have often wondered what a Carat is. A carat is a measure of the mass of a diamond as measured initially in the industry. A single carat is said to be equal to 200 milligrams. A carat is measured by a Point unit which is equal to one-hundredth of a carat. The price of a carat increases if the weight of the carat or diamond increases since the larger the diamond is the more valuable and beautiful it is.

Color is an important point in the decision of the value of a diamond for making Diamond Earrings. The most valuable and rarest of diamonds are colorless or totally white and are graded ‘D’. The grade given after this means that a diamond has small amount of color. There are denoted by the grades E and F. The next grades given are G and H and means that the diamond is few traces of color. Those diamonds that are fully colored are denoted by I or J or K. Pink diamonds are the rarest.

To make Diamond Earrings, the diamond must first be cut properly. This involves cutting and shaping a diamond or gemstone intricately, carefully and evenly. These must be shaped and polished properly so that the final shape has all the features of a diamond. The best and the most popular technique of diamond cutting is made by calculating the ideal shape of the stone for returning and scattering entering light when seen from vertically. It is called the Round brilliant cut and by this rule the diamond gets 57 polished surfaces.

Get complete information about our product range visit : GEMCO INTERNATIONAL

Read More

How to choose your Gemstone Earrings

Gemstone Earrings are made of gemstones which are also called gems in short. A gemstone is a mineral that is transformed into a major component of an article of jewelry after going through many industrial processes like polishing and cutting. There are many kinds of gemstones. For instance, although Lapis Lazuli is not a mineral but an organic material is also regarded as a gemstone. Again, some gemstones are soft and are still used in jewelry as they are lustrous. Diamonds, emeralds, sapphires and rubies are the most demanded for being precious gemstones while amethyst, agate, jasper and the rest are seen as semi-precious stones.

When choosing or buying Gemstone Earrings the consumer has to take care and verify the four Cs of the gemstone or gemstones. The four Cs are carat, cut, color and clarity. Originally this system was used industrially for grading of diamonds but due to its helpfulness and effectively it was also used to grade other gemstones as well. Value of a gemstone depends on whether the stone or mineral is colored or not and are graded according to this. Value likewise depends on how well the gemstone is cut. It is the most important determinant of the prices. Although gemstones are graded according to their being precious or semi-precious, the price still depends largely on the brand name. However, diamonds and emeralds are still the market leaders in the gemstone trade. Rare gemstones include stones like red beryl, andalusite, cassiterite, axinite and clinohumite.

Price of gemstones in Gemstone Earrings can vary largely and relies heavily on the economy, although they are stable for considerable periods of time as well. Of course, if you consider the value of per carat, then larger gemstones are more valuable than the smaller ones. At times consumers desire gemstones of smaller sizes which, however, are not that much subjected to price fluctuations in the market. Just to give you an idea of the value of carats, a 1 carat amethyst costs between $20000 and $50000.
 

There are some gemstones that are used as jewelry like Gemstone Earrings in the exact form in which they are found, although more often these gemstones too have to go through the industrial purification process of polishing and cutting. Among gemstones two broad classification groups are the cabochons that are dome shaped and smooth, and the gemstones that are industrially cut by using a Faceting Machine what polishes the small facets of the gemstones causing them to increase in brilliance which happens when the light entering into them increases. This process is important as it greatly increases the value of the gemstone. For example, the gemstones that are cut and used as cabochons are variscite, opal turquoise and other. These gemstones especially decorative items as they show the color of the stone. These are industrially polished with the help of grinding wheels and other polishing agents. This is done to polish the surface of the gemstone, to shape its surface and to grind it for removing impurities.

 

Get complete information about our product range visit : GEMCO INTERNATIONAL

Read More

Process of making Diamond Rings

Diamonds were first mined in India in ancient era. Pliny the Elder, a Greek historian mentioned the availability and mining of diamonds in India. Today diamonds are also mined in Canada, Russia, Australia and Botswana.

In this worldwide jewelry industry today, in order to make Diamond Rings, the process used is long and arborous that increases the cost of the diamonds as well. Special treatments are done on the diamonds, both synthetic diamonds and natural diamonds, in a treatment called Diamond Enhancement. They are done to increase the beauty of the diamond. In the diamond enhancing treatment a laser drill is used to remove any impurity or unwanted inclusions on the diamonds after which sealants are applied to the stone to fill in the cracks in case they occur during the process. Diamond Enhancement also includes treatments for improving the color of the white diamonds, and treatments for giving a custom color to the diamond if it is so desired.

Perhaps the final step in making Diamond Rings is to apply a coating. This is done with the help of a diamond stimulant. This diamond stimulant is applied to further make the diamond shine or in other words to enhance its ‘diamond-like qualities.’ An example of a diamond stimulant is a kind of Diamond-like Carbon which is a carbonaceous and shapeless material that shares a few features similar to a diamond. Coating is done to transfer some of the diamond-like properties from the Diamond-like Carbon to the diamond gemstone. One instance of such treatments is the Raman Spectroscopy method.

For making Diamond Rings a lot of treatments are first needed to be done on the gemstones. As said before these treatments are done to enhance the shining of the diamond, which directly increases the value of the diamond. Treatments are of many kinds and vary from company to company, but in general they are all widely used.

The foremost treatment process is that of Heating. This is done to improve the clarity and color of the diamond. This process has long been used by gem cutters, miners and others for hundreds of years. If the heating is done for a short time citrine is used. If the heating is done for a long time then the substance is done with ametrine. Heating enhances the color and shades and shining quality of a diamond. Heating at low temperature is also done for removing the impurities and dirt. During heating as part of an industrial process, the diamond is protected by a substance like boracic acid. Unless this is done, the diamond can and in most cases does get permanently burnt on the surface. In some cases it even gets fully burnt.

The next step of making Diamond Rings is that of treating the gemstone with radiation. This is done to change the color at times or to enhance the beauty of the diamond. For colored diamonds this step is very important. After the radiation is done on the gemstones it is waxed, after which it is fracture filled, thus giving the diamond its final shape.

 

 
 Get complete information about our product range visit : GEMCO INTERNATIONAL

Read More